Please note! Before using the string lights, the solar panel must be fully charged using a micro USB cable. It takes 5 hours to fully charge the solar panel. Charging the solar panel improves the product's lifespan.
Are you looking for atmospheric lighting for your outdoor space, but your garden or balcony does not have a power outlet? No problem, this solar string light is completely solar-powered. This makes the string light environmentally friendly and easy to install. The string light comes with 10 filament bulbs in hanging lampholders. The bulbs have a trendy look that is similar to the old familiar incandescent bulb. In addition, a playful lighting effect is created by placing the LEDs 2 cm apart. A classic model with a modern twist.
The string has a powerful 3-watt solar panel with battery. The battery charges during the day and when it gets dark, the bulbs will light up. No sun? Then you can charge the string lights with a USB cable. The solar panel has a built-in light sensor, so the lights automatically turn on in the dark. There is also a handy on/off switch in case you don't want any light in the garden one evening. In addition, there is an automatic timer in the solar panel that ensures that the lights turn off after 8 hours of burning. The string light can be set to three different modes: standard, flashing and fast flashing. See the Manual for more information.
A solar lamp needs light during the day to charge so that it can burn in the evening. The more hours of sunshine the solar panel receives, the better the battery is charged to release energy in the form of light in the dark. Has the lamp been able to capture little or no light on a cloudy day? Then the battery will be less charged. As a result, the lamp may burn for less time or not give off any light at all. In winter, the sun will not always be strong enough for Solar Products to charge properly. The solar string lights will therefore burn longer in summer and shorter in winter. Not only the sun, but also the angle at which the sun shines on the solar panel is important. The more perpendicular the angle, the better the battery will charge. Cleaning the solar panel regularly will extend the life and burning time of your solar lamp.
Before use, fully charge the battery of a solar lamp with a micro USB cable. This solar light string has an on/off switch. Set the switch to 'off' and connect the panel to the micro USB cable. Allow the panel to charge for at least 5 hours so that the battery has a chance to fully charge. You can then turn the switch to 'on' and enjoy your Solar lighting in the evening.
The light colour of lamps is expressed in a specific Kelvin value. These filament lamps have a colour temperature of 2200 Kelvin, which is 'extra' warm white. It is similar to the colour of candlelight and gives off a warm, atmospheric light.
The lamps have a sturdy polycarbonate cover. The LED lamps have a long lifespan. In the unlikely event that a bulb breaks, you can easily replace it.