Please note! Before using the string of lights, the solar panel must be fully charged using a micro USB-C cable. It takes 8 hours to fully charge the solar panel. Charging the solar panel improves the product's lifespan.
No wiring possible in your garden, but would you like light in a specific place? Then choose this sustainable solar string light. The lights are powered by 100% solar-powered energy, so no wiring or power outlet is required. The string lights are 10 metres long in total and have 20 filament bulbs. The bulbs have a trendy look that is similar to the old familiar incandescent bulb. A classic model with a modern twist.
The string has a powerful 6-watt solar panel to quickly capture a lot of sunlight. The slim design is charged by the sun during the day. A cloudy day? Then you can charge the string lights with a USB-C cable. The solar panel has a built-in light sensor, so the lights automatically turn on in the dark. There is also a handy on/off switch in case you don't want any light in the garden one evening. In addition, there is an automatic timer in the solar panel that ensures that the lighting switches off after 8 hours of use. The string of lights can be set to three different modes: standard, flashing and fast flashing. See the manual for more information.
A solar lamp needs light during the day to charge so that it can burn in the evening. The more hours of sunshine the solar panel receives, the better the battery is charged to release energy in the form of light in the dark. Has the lamp been able to capture little or no light on a cloudy day? Then the battery will be less charged. As a result, the lamp may burn for less time or not give off any light at all. In winter, the sun will not always be strong enough for Solar products to charge properly. The solar light string will therefore burn longer in summer and shorter in winter. Not only the sun, but also the angle at which the sun shines on the solar panel is important. The more perpendicular the angle, the better the battery will charge. Cleaning the solar panel regularly will extend the life and burning time of your solar lamp.
Before use, fully charge the battery-powered lamp of a solar lamp with a micro USB-C cable. This solar string lights have an on/off switch. Set the switch to 'off' and connect the panel to the micro USB-C cable. Allow the panel to charge for at least 8 hours so that the battery has a chance to fully charge. You can then turn the switch to 'on' and enjoy your Solar lighting in the evening.
The light colour of lamps is expressed in a specific Kelvin value. These filament lamps have a colour temperature of 2200 Kelvin, which is 'extra' warm white. It is comparable to the colour of candlelight and gives off a warm, atmospheric light.
The lamps have a sturdy polycarbonate cover. The LED lamps have a long lifespan. In the unlikely event that a bulb breaks, you can easily replace it.
