The OTG-GG-9 emergency light has the highest light output in our range. It has 20 LEDs and a test button, so you can check that the battery is working. You attach the supplied legends yourself, so the signage matches your escape route. The housing and diffuser are made from high-quality plastic.
The legends are self-adhesive. To apply them, wet the cover of the light with soapy water. Then position the legend you want and smooth out the air bubbles. This also makes switching between legends easy.
Looking for legends with other escape routes? Order a separate legend set with eight legends.
The LED emergency lighting can be mounted above doors and windows and on walls. An emergency lighting specialist can help you work out how many areas need emergency lighting and how best to install it. Circles are marked on the back and the four sides of the light that can be drilled through. Once you have drilled a hole, connect the wiring to the terminal block mounted on the circuit board. This connects the light to the mains (230V). To protect the hole against water damage, fit a PG9 cable gland in the drilled hole and run the wiring through it. This protects the light against water damage and prevents the cable from coming loose from the terminal block.
The light can be set to maintained (always on) or non-maintained (on only when needed). When set to maintained, the light stays on all the time, whether or not there’s a power cut. When set to non-maintained, the light only comes on when the mains power fails, then runs on its battery for three hours. Three hours is generally enough time for staff and visitors to leave a building, and it meets the legal requirement.
