The OTG-FF is our most popular emergency lighting fixture among architects and designers due to its sleek design. Previously, this fixture was only available in White, but we have expanded our range with a Black version.
The Black luminaire has 16 SMD LEDs. This luminaire comes with four pictograms (polycarbonate plates) that show the following arrow directions: left, right, up and down. The pictograms can be placed on both sides of the luminaire. The luminaire is widely applicable thanks to its handy 90-degree rotation angle. The rotation angle allows you to mount the fixture on both the Ceiling and the wall. The fixture has a test button that allows you to manually check whether the battery is working. We also stock the battery pack used in this fixture separately, in case you want to replace it in the future.
It is possible to order a separate pictogram set for this luminaire, consisting of eight pictograms.
The LED emergency lighting can be mounted above doors, windows and on walls. In consultation with a specialist, you can determine how many locations require emergency lighting and how to mount it.
The fixture can be set to continuous (permanent lighting) or non-continuous (non-permanent lighting). If the fixture is set to continuous, the light will also remain on when there is no power failure. If you set the fixture to non-continuous, the light will only come on when the fixture is no longer receiving power from the mains and will then remain on for three hours on battery power. Three hours is usually sufficient for employees and visitors to leave a building and also falls within the legal standard.
All our emergency lighting is CE certified and complies with the standards and requirements applicable in Europe. The housing and diffuser are made of high-quality plastic.
